# resistance measuring unit

overflow Keithley » Hello , I am working on a Relay-test  program the hardware is composed from the Keithley to take the mesearment and a Pickering card to match all the pins with the Realy matrix  . My problem is when the keithley is on , i get the error message "Overflow MΩ" and the program cant find the pickering ca… Forums.ni.com

Bn1 healey fuel sender ohms range? At full and at empty? FT5301 smiths sender. : The 100 Forum : The Austin-Healey Experience » I am looking for information on the 1955 100/4 BN1 fuel sender ohms range. It is a 12V Smiths FT5301/06 unit. What are the expected OHMs at empty and OHMS at full? Moss motors lists this unit was listed as on All Healeys (except BJ8) and for use in 61 sprite mkII, 19 Ahexp.com

96 XP Testing the CDI Module » I am not getting spark signal to the coil. Checked the inductive pickup, grounds, plug wire, new coil, ohmed out white wire from mag connector and connector in relay box. Tested the CDI with multimeter and found Black (+) to GY/WH (-) 500K ohms vice 33K ohms specified in the shop manual. Picked… Seadooforum.com

fuel gauge : The 3000 Forum : The Austin-Healey Experience » hi you all, anybody has experience with the fuel gauge and fuel sender? My problem is that when driving the fuel gauge doesn't work but after a few miles it shows max fuel . If I stop and start driving again the fuel gauge doesn't work again. I already used a mul Ahexp.com

Fuel sender resistance range : MGB & GT Forum : The MG Experience » Is the standard resistance range 20R to 220R for all years? I have a sending unit with an integrated fuel pick up tube on my 77 which reads 18 to 277. It looks brand new, and my gauge reads less less than 1/4 tank when actually 1/2 full. Mgexp.com

MGB late model Temperature sending unit- resistance : MGB & GT Forum : The MG Experience » As I was contemplating using an aftermarket set of gauges on my car I decided to test the resistance of the stock sending unit to see if it might be a match for the gauge I was considering. I placed the gauge in a kitchen pot on the stove with a digital themometer in the water and a digital multi Mgexp.com